CR Seals® 22424 Type CRW1 Small Bore Radial Shaft Seal, 2-1/4 in ID x 3.194 in OD x 0.438 in W, Nitrile Lip

22424 MFG #: 22424
Requires Quote
CR Seals® 22424 Type CRW1 Small Bore Radial Shaft Seal, 2-1/4 in ID x 3.194 in OD x 0.438 in W, Nitrile Lip
  • Request For Quote: Yes
  • Type: Rectangular
  • Width: 10
  • Height: 7
  • Legend: DANGER CONFINED SPACE ENTER BY PERMIT ONLY
  • Legend Style: Text
  • Legend/Background Color: Black/Red on White
  • Material: B-401 Polystyrene
  • Mounting Type: Corner Hole
CR Seals® Small Bore Radial Shaft Seal, Type CRW1, 2-1/4 in Inside Dia, 3.194 in Outside Dia, 0.438 in Width, R Cross Section, -40 to 212 deg F, Nitrile Lip, Bore Tite Coating, Green
QTY
Add to List
  • English language
  • With single steel case, wave lip and carbon steel garter spring
  • Abrasion and chemical resistant
  • The lip has a sealing edge that is formed by molding, cutting or grinding
  • -40 to 176 deg F service temperature
  • It is normally pressed against the counter face surface of the shaft, with a defined radial load, by
  • The edge of the sealing lip and the shaft counter face surface form the most important functional ar
  • 0.0591 in THK
  • The sealing effect of the lip can be enhanced by designing the contact area of the lip with hydrodyn
  • B-401 plastic safety sign is a polystyrene sign panel with protected graphics
  • Panels are round cornered and punched for application to rigid surfaces
  • Designed for use in light duty industrial, utility, commercial and institutional environments
  • Common uses include safety signs, utility signs, information signs and equipment warning signs
  • Legend withstands up to 700 cycles
  • 3 to 5 years average expected outdoor life of product will depend on user definition of failure and
English language
With single steel case, wave lip and carbon steel garter spring
Abrasion and chemical resistant
The lip has a sealing edge that is formed by molding, cutting or grinding
-40 to 176 deg F service temperature
It is normally pressed against the counter face surface of the shaft, with a defined radial load, by a garter spring
The edge of the sealing lip and the shaft counter face surface form the most important functional area of a radial shaft seal
0.0591 in THK
The sealing effect of the lip can be enhanced by designing the contact area of the lip with hydrodynamic features
B-401 plastic safety sign is a polystyrene sign panel with protected graphics
Panels are round cornered and punched for application to rigid surfaces
Designed for use in light duty industrial, utility, commercial and institutional environments
Common uses include safety signs, utility signs, information signs and equipment warning signs
Legend withstands up to 700 cycles
3 to 5 years average expected outdoor life of product will depend on user definition of failure and climatic conditions