Crouse-Hinds FlexStation™ EDSC11274 1-Gang Factory Sealed Heavy Duty Through-Feed Selector Switch Control Station, 600 VAC, 8NO-4NC Contact, 3/7B/7C/7D/9E/9F/9G NEMA Rating
EDSC11274
MFG #: EDSC11274
$1,717.85
/ EA
Estimated Delivery 7 to 10 Business Days
- Manufacturer: Eaton
- Type: 1-Gang Factory Sealed Heavy Duty Through Feed
- Series: EDS
- Voltage Rating: 600
- Contact Configuration: 8NO-4NC
- Contact Mode: Maintained
- Actuator: Lever
- NEMA Rating: NEMA 3/7B/7C/7D/9E/9F/9G
- Material: Feraloy® Iron Alloy
- Finish: Electro-Galvanized/Aluminum Acrylic Painted
- Dimensions: 5-7/8 in L x 3-1/2 in W x 3-1/16 in H
- Brand: Crouse-Hinds
Crouse-Hinds FlexStation™ Selector Switch Control Station, 1-Gang Factory Sealed Heavy Duty Through-Feed, Series: EDS, 600 VAC, 8NO-4NC Contact Configuration, Maintained Contact Mode, Lever Actuator, 3/7B/7C/7D/9E/9F/9G NEMA Rating, Feraloy® Iron Alloy, Electro-Galvanized/Aluminum Acrylic Painted, 5-7/8 in L x 3-1/2 in W x 3-1/16 in H Dimensions
- Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a h
- Reduce installation problems
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance o
- Mounting lugs and taper tapped hubs with integral bushings
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and si
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front bu
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bush
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bush
- Explosionproof, dust-ignitionproof and raintight
- 1/2 in hub
- 4-circuit
- Three position, four-circuit
- 3-position
- ED12 replacement contact blocks
Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
Reduce installation problems
Reduce installation problem
Eliminate external seals
Lower installation cost
Improve safety
Are used with general purpose snap and pushbutton type switches
Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance of water around operating shafts
Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
Mounting lugs and taper tapped hubs with integral bushings
Mounting lugs and taper tapped hubs with integral bushing
Large machine screws for fastening covers to bodies
Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
Explosionproof, dust-ignitionproof and raintight
1/2 in hub
4-circuit
Three position, four-circuit
3-position
ED12 replacement contact blocks