Crouse-Hinds FlexStation™ EDS2140 SA 1-Gang 4-Way Dead End Factory Sealed Snap Switch Control Station With Snap Switch, 3/4 in Hub, 120/277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating

EDS2140 SA MFG #: EDS2140 SA
$1,528.88 / EA
Estimated Delivery 7 to 10 Business Days
Crouse-Hinds FlexStation™ EDS2140 SA 1-Gang 4-Way Dead End Factory Sealed Snap Switch Control Station With Snap Switch, 3/4 in Hub, 120/277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating
  • Manufacturer: Eaton
  • Type: 1-Gang Dead End Factory Sealed
  • Series: EDS
  • Voltage Rating: 120/277
  • Amperage Rating: 20
  • Operator Type: Front
  • Actuator: Handle
  • Connection Type: Threaded
  • NEMA Rating: NEMA 3/7B/7C/7D/9E/9F/9G
  • Mounting Type: Surface
  • Material: Copper Free Aluminum
  • Finish: Natural
  • Dimensions: 3-1/2 in W x 3-1/16 in D
  • Brand: Crouse-Hinds
Crouse-Hinds FlexStation™ Snap Switch Control Station, 1-Gang 4-Way Dead End Factory Sealed, Series: EDS, 120/277 VAC, 20 A, 4 Pole, Front Operator, Handle Actuator, Thread Connection, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Copper-Free Aluminum, Natural, 3-1/2 in W x 3-1/16 in D Dimensions
QTY
Add to List
  • Reduce installation problems
  • Eliminate external seals
  • Lower installation costs
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance
  • Mounting lugs and taper tapped hubs with integral bushings
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and si
  • Close tolerances in machining of wide, mating flanges and journalled shafts and bearings for front b
  • On enclosures with front lever and side rocker type operating handles, threaded type shafts and bush
  • Dust-ignitionproof, raintight
  • To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the
  • In conjunction with magnetic starters or contactors for remote control of motors
  • For manual starting of small AC/DC motors
  • To provide manual starting and stopping and motor running protection (with heater)
  • 3/4 in hub
  • 4-way
Reduce installation problems
Eliminate external seals
Lower installation costs
Improve safety
Are used with general purpose snap and pushbutton type switches
Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance of water around operating shafts
Mounting lugs and taper tapped hubs with integral bushings
Large machine screws for fastening covers to bodies
Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
Close tolerances in machining of wide, mating flanges and journalled shafts and bearings for front button operation, produces flame tightness of enclosure joints
On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
Dust-ignitionproof, raintight
To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
In conjunction with magnetic starters or contactors for remote control of motors
For manual starting of small AC/DC motors
To provide manual starting and stopping and motor running protection (with heater)
3/4 in hub
4-way