NSI 3000 Button Photocontrol, 120 VAC, 2000 W Tungsten, 1200 VA Ballast, Flush Mount, Lexan
K4021C70
MFG #: 3000
Requires Quote
NSI Photocontrol, Button, Series: 3000, 120 VAC, 50/60 Hz Frequency, 2000 W Tungsten, 1200 VA Ballast, 1NC-SPST Contact Form, 2 min Timing, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio Sensitivity, Environmental Conditions: -40 to 140 deg F Operating Temperature, Flush Mounting, Lexan, 2 in H x 1 in W x 1-1/2 in D Dimensions
- Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
- Photocell responds to the light spectrum near to that of a human eye
- Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning
- Control housing is weather resistant molded Lexan® with ultrasonically welded seams
- Flush mounting through 11/16 in hole in post lantern or lighting fixture, 3/8 in NPT, stem 3/4 in lo
- Works with screw base CFL
- On and Off time delay
- Cadmium sulphide, conformal coated 1/2 in diameter cell
- Three color coded, minimum 9 in wire leads, 16 AWG, rated for 105 deg C lead wires
- Averages under 1 W power consumption
- On fail mode
Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
Photocell responds to the light spectrum near to that of a human eye
Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
Control housing is weather resistant molded Lexan® with ultrasonically welded seams
Flush mounting through 11/16 in hole in post lantern or lighting fixture, 3/8 in NPT, stem 3/4 in long
Works with screw base CFL
On and Off time delay
Cadmium sulphide, conformal coated 1/2 in diameter cell
Three color coded, minimum 9 in wire leads, 16 AWG, rated for 105 deg C lead wires
Averages under 1 W power consumption
On fail mode