NSI 2001 2000 Photocontrol With 1/2 in 180 deg Swivel Conduit, 120 VAC, 2000 W Tungsten, 1800 VA Ballast, Screw/Stem Mount, Lexan
K4221C70
MFG #: 2001
$23.42
/ EA
Estimated Delivery 7 to 10 Business Days
NSI Photocontrol, Series: 2000, 120 VAC, 50/60 Hz, 2000 W Tungsten, 1800 VA Ballast, SPST, 2 min, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio, Environmental Conditions: -40 to 140 deg F Operating Temperature, Screw/Stem Mount, Lexan
- Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
- Photocell responds to the light spectrum near to that of a human eye
- Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning
- Works with screw base CFL and LED lamp
- On and Off time delay
- Cadmium sulphide, epoxy conformal coated 1/2 in diameter cell
- Remain closed between dusk and dawn (the unit fails in the on position) contacts
- Three color coded, minimum 6 in wire leads, 16 AWG, rated for 105 deg C lead wires
- On fail mode
- Epoxy conformal coated
Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
Photocell responds to the light spectrum near to that of a human eye
Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
Works with screw base CFL and LED lamp
On and Off time delay
Cadmium sulphide, epoxy conformal coated 1/2 in diameter cell
Remain closed between dusk and dawn (the unit fails in the on position) contacts
Three color coded, minimum 6 in wire leads, 16 AWG, rated for 105 deg C lead wires
On fail mode
Epoxy conformal coated