Lithonia Lighting® L3LED T24 R6 L3LED T24 Recessed Lighting Housing, LED Lamp, 120 VAC, 4 in Ceiling Opening, Aluminum Housing
220YTE
MFG #: L3LED T24 R6
$9.68
/ EA
Non-Stock Item
- Request For Quote: No
Lithonia Lighting® Recessed Lighting Housing, Series: L3LED T24, 120 VAC, 4 in Ceiling Opening, LED Lamp, 7.9 W Lamp, 1 Lamps, Recessed Mount, For Use With: P Series Open and Baffle Wide Flange LED Module/LED Gimbal Modules, 4 in Dia, 16-1/8 in Height, 11 in Width, Aluminum Housing, Gray
- Recessed housing rated IC or Non-IC, for new construction only
- Approved for all ceiling and wiring types
- Approved for direct burial in insulation
- Airtight standard
- Tested to meet current energy codes
- Aluminum foam gasketed housing with galvanized steel pan
- Galvanized bar hangers span up to 24 in outer circumference and feature stepped shank nail and posit
- Two locking screws hold fixture in position
- Galvanized steel junction box (4) built-in Romex® clamps
- (4) 1/2 in and (2) 3/4 in knockouts with slots for pryout, rated for through branch wiring
- Rated for through branch wiring
- Maximum 4 (2 in, 2 out) 12 AWG conductors
- Ground wire provided
- Removable J-box doors for easy access
- Quick disconnect provided for power connection to the LED modules
- Paint overspray masked by disposable disconnect plug
- Housing and LED module combination is IC rated and thermally protected
- Airtight housing suitable for airtight installations
- 2 x 8 and 2 x 6 wood joist or T-bar installation
- Expandable bar hangers allow for off center mounting in wood joist or T-bar ceilings
Recessed housing rated IC or Non-IC, for new construction only
Approved for all ceiling and wiring types
Approved for direct burial in insulation
Airtight standard
Tested to meet current energy codes
Aluminum foam gasketed housing with galvanized steel pan
Galvanized bar hangers span up to 24 in outer circumference and feature stepped shank nail and positioning guide with integral T-bar locks
Two locking screws hold fixture in position
Galvanized steel junction box (4) built-in Romex® clamps
(4) 1/2 in and (2) 3/4 in knockouts with slots for pryout, rated for through branch wiring
Rated for through branch wiring
Maximum 4 (2 in, 2 out) 12 AWG conductors
Ground wire provided
Removable J-box doors for easy access
Quick disconnect provided for power connection to the LED modules
Paint overspray masked by disposable disconnect plug
Housing and LED module combination is IC rated and thermally protected
Airtight housing suitable for airtight installations
2 x 8 and 2 x 6 wood joist or T-bar installation
Expandable bar hangers allow for off center mounting in wood joist or T-bar ceilings