Generac® RTG12EZA1 Pre-Wired Automatic Transfer Switch With Built-In Load Center, 120/240 VAC, 50 A, 1 Phase, NEMA 1

RTG12EZA1 MFG #: RTG12EZA1
Requires Quote
Generac® RTG12EZA1 Pre-Wired Automatic Transfer Switch With Built-In Load Center, 120/240 VAC, 50 A, 1 Phase, NEMA 1
  • Request For Quote: Yes
Generac® Transfer Switch, Pre-Wired Automatic, 120/240 VAC, 50 A, 1, 15.4 in Width, 3.8 in D, 22-1/2 in Height, NEMA 1, Steel
QTY
Add to List
  • All pre-wired switche are housed in a steel NEMA 1 enclosure, with electrostatically applied and bak
  • The heavy-duty generac contactor is a UL recognized device, designed for year of service
  • The controller at the generator handle all the timing, sensing and exercising function
  • Electrically operated, mechanically-held contact for fast, positive connections
  • Rated for all classes of load, 100 percent equipment rated, both inductive and resistive
  • 2 pole, 240 VAC contactor
  • 30 millisecond transfer time
  • Dual coil (100A) and single coil (50A) design
  • Main contact are silver plated or silver alloy to resist welding and sticking
  • NEMA 1 (indoor rated) enclosure is standard
  • The transfer switch contactor is rated at 240 VAC and is available in a single phase configuration o
  • 12 circuit switch
  • 60 Hz rated AC frequency
  • 10000 A Withstand
  • 1/0 - #14 lug range
  • Open transition load transition type
  • Less than 60 percent utility voltage drop-out
  • 5 second engine warm-up delay
  • 60 percent for 5 second standby voltage sensor
  • Greater than 80 percent utility voltage pickup
All pre-wired switche are housed in a steel NEMA 1 enclosure, with electrostatically applied and baked powder paint
The heavy-duty generac contactor is a UL recognized device, designed for year of service
The controller at the generator handle all the timing, sensing and exercising function
Electrically operated, mechanically-held contact for fast, positive connections
Rated for all classes of load, 100 percent equipment rated, both inductive and resistive
2 pole, 240 VAC contactor
30 millisecond transfer time
Dual coil (100A) and single coil (50A) design
Main contact are silver plated or silver alloy to resist welding and sticking
NEMA 1 (indoor rated) enclosure is standard
The transfer switch contactor is rated at 240 VAC and is available in a single phase configuration only
12 circuit switch
60 Hz rated AC frequency
10000 A Withstand
1/0 - #14 lug range
Open transition load transition type
Less than 60 percent utility voltage drop-out
5 second engine warm-up delay
60 percent for 5 second standby voltage sensor
Greater than 80 percent utility voltage pickup