3M Canada

3M™ 5536A QS-III 5536A Cold Shrink In-Line Splice Kit, 35 kV, 350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil Conductor, 2 ft 11 in L Splice, Silicon Rubber

271501537 MFG #: 5536A
$3,481.32 / EA
Estimated Delivery 7 to 10 Business Days
3M™ 5536A QS-III 5536A Cold Shrink In-Line Splice Kit, 35 kV, 350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil Conductor, 2 ft 11 in L Splice, Silicon Rubber
  • Manufacturer: 3M
  • Type: 4-Way Multi-Mold Resin
  • Series: 85 Series
  • Voltage Rating: 1
  • Cable Type: Non-Shielded
  • Cable Diameter: 7/16
  • Conductor Size: 4 AWG, 8 AWG
  • Splice Length: 5
  • Connector Type: Split Bolt H Tap or C Compression
  • Temperature Rating: 90 to 130
  • Material: Resin
  • Color: Green
  • Brand: 3M™
3M™ Splice Kit, Cold Shrink In-Line, Series: QS-III 5536A, 35 kV, Longitudinally Corrugated/Tape Shield/UniShield®/Wire Shield Cable, 350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil Conductor, 1.24 to 2.07 in Insulation, 2 ft 11 in Splice Length, 1 Conductor, 105 to 140 deg C, Silicon Rubber, Black, 3.9 in Dia Dimensions
QTY
Add to List
  • Versatility designed into each kit accommodates a wide range of cable size
  • In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielde
  • All materials provided to insulate and waterproof one splice, compound has low viscosity for fast, c
  • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interfa
  • Convenient closed mixing pouch permits clean, easy resin handling
  • Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct bu
  • Wrap around polyester film mold contains porous webbing which assures proper insulation spacing arou
  • Silicon rubber splice body provides good high and low temperature performance and the EPDM rubber ja
  • No special tools required
  • High voltage, production-tested for partial discharge and AC ensure reliability
  • Electrically insulates odd sized and odd shaped splices on cables
  • Cold shrink design for quick and easy installation
  • Pliable plastic molds are formed around splices
  • The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick i
  • Rated for 1 kV cables
  • Used with in-line splicing, feeder and distribution circuits, tape, wire, UniShield® and longitudina
  • 4-1/4 in spacer web, 0.85 sealing putty
  • 0.51 to 1.7 in OD connector
  • Accommodates 4 AWG stranded H or C-tap compression conductors
  • 6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shear bolt conn
  • 1-3/4 in maximum conductor size (height plus width)
  • 1090 psi tensile strength
  • 1-1/2 in maximum sheath opening length
  • 610% elongation
  • 444 psi tensile strength
  • 370 V/mil dielectric strength
  • 98% elongation
  • 524 V/mil dielectric strength
  • 8 AWG, 4 AWG conductor size
  • 10/case
  • 7/16 in OD run/tap cable
Versatility designed into each kit accommodates a wide range of cable size
In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
All materials provided to insulate and waterproof one splice, compound has low viscosity for fast, complete filling of splice and low exotherm which will not damage plastic insulated cable
Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
Convenient closed mixing pouch permits clean, easy resin handling
Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations
Wrap around polyester film mold contains porous webbing which assures proper insulation spacing around splice and connector
Silicon rubber splice body provides good high and low temperature performance and the EPDM rubber jacket offers physical protection
No special tools required
High voltage, production-tested for partial discharge and AC ensure reliability
Electrically insulates odd sized and odd shaped splices on cables
Cold shrink design for quick and easy installation
Pliable plastic molds are formed around splices
The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick installation and better cable size transitions and 15,000 a rated for faults current protection
Rated for 1 kV cables
Used with in-line splicing, feeder and distribution circuits, tape, wire, UniShield® and longitudinally corrugated (LC) shielded cables, transitions from shielded to neutral power cables, copper or aluminum conductors, size transition splicing, direct bur
4-1/4 in spacer web, 0.85 sealing putty
0.51 to 1.7 in OD connector
Accommodates 4 AWG stranded H or C-tap compression conductors
6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shear bolt connector length
1-3/4 in maximum conductor size (height plus width)
1090 psi tensile strength
1-1/2 in maximum sheath opening length
610% elongation
444 psi tensile strength
370 V/mil dielectric strength
98% elongation
524 V/mil dielectric strength
8 AWG, 4 AWG conductor size
10/case
7/16 in OD run/tap cable