Crouse-Hinds Arktite® EBBRA104 Interlocked Raintight Explosionproof Receptacle, 480 VAC/250 VDC, 100 A, 4 Poles, 3 Wires

EBBRA104 MFG #: EBBRA104
$11,970.23 / EA
Estimated Delivery 7 to 10 Business Days
Crouse-Hinds Arktite® EBBRA104 Interlocked Raintight Explosionproof Receptacle, 480 VAC/250 VDC, 100 A, 4 Poles, 3 Wires
  • Manufacturer: Eaton
  • Type: Dust Ignitionproof Grounding Style 2 Interlocked Raintight
  • Series: EBBR
  • Voltage Rating: 480 VAC, 250 VDC
  • Amperage Rating: 100
  • Number of Poles: 4
  • Number of Wires: 3
  • NEMA Rating: NEMA 3/3R/7B/7C/7D/9F/9G/12
  • Material: Copper Free Aluminum
  • Color: Natural
  • Dimensions: 14.06 in L x 10.25 in W x 24.7 in H
  • Brand: Crouse-Hinds
Crouse-Hinds Arktite® Explosionproof Receptacle, Interlocked Raintight, Series: EBBR, 480 VAC/250 VDC, 100 A, 4 Pole, 3 Wires, NEMA 3/3R/12/7BCD/9FG, Copper Free Aluminum, 24.7 in L x 14.06 W x 10.25 in D Dimensions
QTY
Add to List
  • Rugged, corrosion resistant, cast copper free aluminum construction
  • Rugged, corrosion resistant, cast copper free aluminum construction
  • Accepts compatible Arktite plug of same rating and configuration
  • Mechanical interlock mechanism for dead front construction
  • Mechanical interlock mechanism for dead front construction
  • Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short ci
  • Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short ci
  • A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the ci
  • Plug and receptacle contacts cannot be made or broken under load
  • Plug and receptacle contacts cannot be made or broken under load
  • Operating handles can be padlocked in either "on" or "off" positions
  • The circuit breaker cannot be closed until the plug is fully inserted and the plug cannot be withdra
  • Operating handles can be padlocked in either ON or OFF positions
  • Total compliance to the wiring and room requirements of the NEC
  • Breakers are trip free of the handles and will open under short circuit or overload even if the hand
  • Semi-clamshell enclosure design, with an external machined flat joint flame path between body and co
  • Component operating handles located through the right side wall of the body permits visual confirmat
  • Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adja
  • Semi-clamshell enclosure design, with an external machined flat joint flame path between body and co
  • Copper free aluminum hinges allow the cover to swing well out of the way
  • Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adja
  • Stainless steel, quick release, captive, hex head cover bolts, stainless steel springs provide clear
  • Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufactu
  • Stainless steel, quick release, captive, hex head cover bolts
  • Without circuit breaker
  • Stainless steel springs provide clear indication cover bolts are fully retracted from body
  • Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufactu
  • Simple, straight forward installation of breaker on pre-drilled mounting plate within enclosure
  • Neoprene cover gasket permanently attached to the cover seals out moisture
  • Tap-on mounting feet
  • Fiberglass reinforced polyester contact insulator
Rugged, corrosion resistant, cast copper free aluminum construction
Rugged, corrosion resistant, cast copper free aluminum construction
Accepts compatible Arktite plug of same rating and configuration
Mechanical interlock mechanism for dead front construction
Mechanical interlock mechanism for dead front construction
Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the circuit breaker operating mechanism for safe and dependable operation
Plug and receptacle contacts cannot be made or broken under load
Plug and receptacle contacts cannot be made or broken under load
Operating handles can be padlocked in either "on" or "off" positions
The circuit breaker cannot be closed until the plug is fully inserted and the plug cannot be withdrawn unless the breaker is de-energized
Operating handles can be padlocked in either ON or OFF positions
Total compliance to the wiring and room requirements of the NEC
Breakers are trip free of the handles and will open under short circuit or overload even if the handle is locked in the ON position
Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover makes interior components easily accessible
Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover makes interior components easily accessible
Copper free aluminum hinges allow the cover to swing well out of the way
Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
Stainless steel, quick release, captive, hex head cover bolts, stainless steel springs provide clear indication cover bolts are fully retracted from body
Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers' breakers
Stainless steel, quick release, captive, hex head cover bolts
Without circuit breaker
Stainless steel springs provide clear indication cover bolts are fully retracted from body
Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturer's breakers
Simple, straight forward installation of breaker on pre-drilled mounting plate within enclosure
Neoprene cover gasket permanently attached to the cover seals out moisture
Tap-on mounting feet
Fiberglass reinforced polyester contact insulator