SWITCH ALIGN BELT CONVEYOR 600VAC 15A
AFAX20
MFG #: AFAX20
$5,762.26
/ EA
Estimated Delivery 7 to 10 Business Days
- Manufacturer: Eaton
- Type: Double End Explosionproof Replacement
- Series: AFAX
- Voltage Rating: 600
- Amperage Rating: 15
- Contact Configuration: 2NC
- Action: Snap
- Actuator: Plunger
- Enclosure: NEMA 3/4/IP66
- Mounting: Surface
- Material: Feraloy Iron Alloy
- Dimensions: 5.68 in H x 11.81 in W
- Brand: Crouse-Hinds
EATON Crouse-Hinds Conveyor Belt Alignment Switch, Explosionproof Replacement Double End, Series: AFAX, 600 VAC, 15 A, 2NC Contact Configuration, Snap Action, Plunger Actuator, NEMA 3/4/IP66 Enclosure, Surface Mounting, Feraloy® Iron Alloy, 11.81 in W x 5.68 in H Dimensions
- Furnished with precision switches that provide normally open and normally closed contacts
- Finished with precision switches that provide normally open and normally closed contacts
- Housing consists of a center section which can be mounted either vertically or horizontally and a sw
- Spring loaded operating arm will automatically return switch to normal position when belt interferen
- Enclosure has three 1 in conduit hubs, cast mounting lugs on 1-1/2 in center permit attachment to th
- Total operating force 25 lb
- Operating arm has 3-1/2 in long stainless steel protective roller, approximately 3/4 in lateral move
- Spring loaded operating arm will automatically return switch to normal position when belt interferen
- A severe conveyor belt run-off can rotate the operating arm counter clockwise up to 85 deg without d
- Installation of AFA or AFAX unit on either side of a conveyor belt allows approximately 1 in or a pr
- A typical installation would include a pair of AFA or AFAX units at each end of the conveyor belt wh
Furnished with precision switches that provide normally open and normally closed contacts
Finished with precision switches that provide normally open and normally closed contacts
Housing consists of a center section which can be mounted either vertically or horizontally and a switch housing with an attached switch operating arm
Spring loaded operating arm will automatically return switch to normal position when belt interference is removed
Enclosure has three 1 in conduit hubs, cast mounting lugs on 1-1/2 in center permit attachment to the web of a standard 3 in angle iron
Total operating force 25 lb
Operating arm has 3-1/2 in long stainless steel protective roller, approximately 3/4 in lateral movement of operating arm actuates switch
Spring loaded operating arm will automatically return switch to normal position when belt interference is removed
A severe conveyor belt run-off can rotate the operating arm counter clockwise up to 85 deg without damage to the switch mechanism
Installation of AFA or AFAX unit on either side of a conveyor belt allows approximately 1 in or a pre-determined allowable belt misalignment before switch is actuated
A typical installation would include a pair of AFA or AFAX units at each end of the conveyor belt where belt returns