Paulin® Papco® 075-540 Partial Threaded Hex Head Cap Screw, 7/16 in, 1-3/4 in L Under Head, 5 Grade, Low Carbon Steel, Zinc Chromate Coated

HEB007112C5ZI MFG #: 075-540
$0.46 / EA
Non-Stock Item
Paulin® Papco® 075-540 Partial Threaded Hex Head Cap Screw, 7/16 in, 1-3/4 in L Under Head, 5 Grade, Low Carbon Steel, Zinc Chromate Coated
  • Request For Quote: No
Paulin® Papco® Hex Head Cap Screw, Partial Threaded, Series: 075, Measurement System: Imperial, 7/16 in Thread, 1-3/4 in Length Under Head, 5 Grade, Low Carbon Steel, Zinc Chromate Coated, UNC Thread, 5/8 in W x 9/32 in H Head, Hex Head, 120000 psi Tensile Strength, Material Specification: ASME B18.2.1-1996, SAE J429, 1-1/8 in Minimum Thread Length, C25 to C34 Rockwell Hardness
QTY
Add to List
  • Papco® plated grade 5 cap screws are identified by the three radial bar head marking and are made of
  • Bright electroplated with chromate finish to resist rust
  • Medium carbon steel quenched and tempered C: 0.28 to 0.55, P: 0.025 maximum, S: 0.025 maximum
  • For studs only, sulfur content may be 0.13% maximum
  • There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90%
  • Double heat treated
Papco® plated grade 5 cap screws are identified by the three radial bar head marking and are made of medium carbon steel, quenched and tempered for higher Tensile strength and holding power
Bright electroplated with chromate finish to resist rust
Medium carbon steel quenched and tempered C: 0.28 to 0.55, P: 0.025 maximum, S: 0.025 maximum
For studs only, sulfur content may be 0.13% maximum
There shall be a sufficient hardenability to ensure a microstructure consisting of approximately 90% martensite in the core of threaded sections of the fasteners after hardening and quenching and before tempering
Double heat treated