Columbus Mckinnon

CM® 92 3000 92 Series Universal Plate Clamp, 675 to 6600 lb Load, 1-1/4 in Jaw, 7.559 in OAW, High Tensile Steel, Load Activated Locking

92 3000 MFG #: 92 3000
$1,218.33 / EA
Estimated Delivery 7 to 10 Business Days
CM® 92 3000 92 Series Universal Plate Clamp, 675 to 6600 lb Load, 1-1/4 in Jaw, 7.559 in OAW, High Tensile Steel, Load Activated Locking
CM® Universal Plate Clamp, Series: 92 Series, 675 to 6600 lb, 1-1/4 in Jaw Opening, 3.15 in Bail Opening Width, 7.559 in Overall Width, Load Activated Locking, High Tensile Steel
QTY
Add to List
  • CZ and 92 series plate clamps can be used on all hot rolled structural steel plates and sections up
  • Body of clamp is welded construction
  • Can be used to lift a plate from the horizontal to vertical position and vice versa through 180 deg
  • Clamp jaws and pads are manufactured from high tensile steel
  • Fitted with a hold open and lock closed lever
  • To initiate the self actuating force, a spring is incorporated into the clamp to give an initial bit
  • If the plate should start to slip during lifting, the cam shape of the jaw turns with the material a
  • The cam handle is ergonomically designed with a flat surface to allow for ease of operation while we
  • The cam handle connects to the cam via a robust square drive
  • Unlike others, these plate clamps are designed with a sloping slot, which increases the grip on the
  • Design factor 4:1
CZ and 92 series plate clamps can be used on all hot rolled structural steel plates and sections up to a surface hardness of 300 Brinell (32HRc)
Body of clamp is welded construction
Can be used to lift a plate from the horizontal to vertical position and vice versa through 180 deg
Clamp jaws and pads are manufactured from high tensile steel
Fitted with a hold open and lock closed lever
To initiate the self actuating force, a spring is incorporated into the clamp to give an initial bite on the material
If the plate should start to slip during lifting, the cam shape of the jaw turns with the material and increases the gripping force
The cam handle is ergonomically designed with a flat surface to allow for ease of operation while wearing protective gloves
The cam handle connects to the cam via a robust square drive
Unlike others, these plate clamps are designed with a sloping slot, which increases the grip on the load when the clamp is in the horizontal position
Design factor 4:1