Crosby® 1018437 Anchor Shackle, 1.5 ton Load, 7/16 in, 1/2 in Dia Screw Pin, Hot Dipped Galvanized

1018437 MFG #: 1018437
$19.03 / EA
Estimated Delivery in 3 to 4 Business Days
  • Manufacturer: Crosby Group
  • Series: G-209
  • Load Capacity: 1.5 ton
  • Pin Diameter: 1/2, 1/2 in
  • Pin Type: Screw
  • Inner Length: 1.69, 1.69 in
  • Inner Width: 1.16, 1.16 in
  • Opening Size: 3/4, 3/4 in
  • Eye Outer Size: 1.06, 1.06 in
  • Overall Length: 2.91, 2.91 in
  • Overall Width: 2.37, 2.37 in
  • Body Material: Carbon Steel
  • Pin Material: Alloy
  • Finish: Hot Dipped Galvanized
  • Brand: Crosby®
Crosby® Anchor Shackle, Series: G-209, 1.5 ton Load, 7/16 in Size, 1/2 in Pin Diameter, Screw Pin, 1.69 in Inner Length, 1.16 in Inner Width, 3/4 in Opening, 1.06 in Eye Outer, 2.91 in Overall Length, 2.37 in Overall Width, Carbon Steel Body, Alloy Pin, Hot Dipped Galvanized
QTY
  • Working load limit and grade 6 permanently shown on every shackle
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV,
  • Approved for use at -40 to 400 deg F
  • 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- off
  • The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
  • The tests are conducted by Crosby® and 3.1 test certified
  • All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
  • Look for the Red Pin® the mark of genuine Crosby® quality
Working load limit and grade 6 permanently shown on every shackle
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
Approved for use at -40 to 400 deg F
3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
The tests are conducted by Crosby® and 3.1 test certified
All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
Look for the Red Pin® the mark of genuine Crosby® quality