Crosby® 1018570 Anchor Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized

1018570 MFG #: 1018570
$207.21 / EA
Estimated Delivery in 3 to 4 Business Days
Crosby® 1018570 Anchor Shackle, 12 ton Load, 1-1/4 in, 1-3/8 in Dia Screw Pin, Hot Dipped Galvanized
  • Manufacturer: Crosby Group
  • Series: G-209
  • Load Capacity: 12 ton
  • Pin Diameter: 1-3/8, 1-3/8 in
  • Pin Type: Screw
  • Inner Length: 4.69, 4.69 in
  • Inner Width: 3-1/4, 3-1/4 in
  • Opening Size: 2.03, 2.03 in
  • Eye Outer Size: 3, 3 in
  • Overall Length: 8-1/4, 8-1/4 in
  • Overall Width: 6-1/4, 6-1/4 in
  • Body Material: Carbon Steel
  • Pin Material: Alloy
  • Finish: Hot Dipped Galvanized
  • Brand: Crosby®
Crosby® Anchor Shackle, Series: G-209, 12 ton Load, 1-1/4 in Size, 1-3/8 in Pin Diameter, Screw Pin, 4.69 in Inner Length, 3-1/4 in Inner Width, 2.03 in Opening, 3 in Eye Outer, 8-1/4 in Overall Length, 6-1/4 in Overall Width, Carbon Steel Body, Alloy Pin, Hot Dipped Galvanized
QTY
Add to List
  • Working load limit and grade 6 permanently shown on every shackle
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV,
  • Approved for use at -40 to 400 deg F
  • 3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- off
  • The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
  • The tests are conducted by Crosby® and 3.1 test certified
  • All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
  • Look for the Red Pin® the mark of genuine Crosby® quality
Working load limit and grade 6 permanently shown on every shackle
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
Approved for use at -40 to 400 deg F
3.25 ton through 25 ton G209 anchor shackles are type approved to DNV certification notes 2.7-1- offshore containers
The shackles are statistical proof and impact tested to 42 J min average at -4 deg F
The tests are conducted by Crosby® and 3.1 test certified
All other 209 shackles can meet charpy requirements of 42 J average at -4 deg F upon special request
Look for the Red Pin® the mark of genuine Crosby® quality