Dormont® SuprSafe® 0240185 40 Series Gas Connector, 3/4 in Nominal, MNPT x FNPT End Style, 290900 Btu/cu-ft Flow Rate, 24 in L, Stainless Steel, Domestic
40-4142-24
MFG #: 0240185
$51.75
/ EA
Non-Stock Item
- Request For Quote: No
Dormont® SuprSafe® Gas Connector, Series: 40 Series, 3/4 in Nominal, MNPT x FNPT, 290900 Btu/cu-ft, 3/4 in ID x 1 in OD Dia, 24 in Length, Stainless Steel, Domestic
- Tubing annealed, 304 stainless steel (ASTM A240)
- Brass or plated steel flare nuts and adapter
- Optional coating heavy-duty, antimicrobial, hot-dipped gray PVC (41, 51 and 61 series)
- Coating will not hold a flame
- Approved for indoor/outdoor use with stationary gas appliances/equipment
- -40 to 150 deg F operating temperature with adapters
- 100% factory leak tested
- Exclusive No-Neck® design increases flexibility
- More corrugations per inch increase flexibility and extend service life
- When installing a new appliance or when an existing appliance is moved to a new location a NEW gas c
- Eliminates the need for pipe nipples, 90's and elbows
- Pre-fabricated gas connector means no field threading, cutting or assembly of CSST fitting and tubin
- 465440 btu/cu-ft for LP gas
- BTU/hr 1.55 SG, 2500 BTU/cu-ft at 0.5 in water column pressure drop straight length capacity for LP
- Designed for occasional movement after installation
- City of New York MEA No 376-92-M
- Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters -
- BTU/hr 0.64 SG, 1000 BTU per cu-ft at 0.5 in water column pressure drop straight length capacity for
- Boilers, gas meters, furnaces, commercial water heaters, gas packs/rooftop HVAC units, tankless wate
- All installations must completely comply with all Dormont manufacturing company warnings and instruc
Tubing annealed, 304 stainless steel (ASTM A240)
Brass or plated steel flare nuts and adapter
Optional coating heavy-duty, antimicrobial, hot-dipped gray PVC (41, 51 and 61 series)
Coating will not hold a flame
Approved for indoor/outdoor use with stationary gas appliances/equipment
-40 to 150 deg F operating temperature with adapters
100% factory leak tested
Exclusive No-Neck® design increases flexibility
More corrugations per inch increase flexibility and extend service life
When installing a new appliance or when an existing appliance is moved to a new location a NEW gas connector must be per manufacturer's installation instructions and product standards
Eliminates the need for pipe nipples, 90's and elbows
Pre-fabricated gas connector means no field threading, cutting or assembly of CSST fitting and tubing
465440 btu/cu-ft for LP gas
BTU/hr 1.55 SG, 2500 BTU/cu-ft at 0.5 in water column pressure drop straight length capacity for LP gas
Designed for occasional movement after installation
City of New York MEA No 376-92-M
Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters - connector length may not exceed 48 in
BTU/hr 0.64 SG, 1000 BTU per cu-ft at 0.5 in water column pressure drop straight length capacity for natural gas
Boilers, gas meters, furnaces, commercial water heaters, gas packs/rooftop HVAC units, tankless water heater, stationary standby generators
All installations must completely comply with all Dormont manufacturing company warnings and instructions, national, state and local codes and all applicable ansi standards