Liberty Pumps® FLH61A-2 High-Head Submersible Effluent Pump, 74 gpm Max Flow, 15 ft Rated Head, Automatic, 115 VAC, 1 ph

FLH61A-2 MFG #: FLH61A-2
Requires Quote
Liberty Pumps® Submersible Effluent Pump, High-Head, Series: FLH60, 74 gpm Maximum, 15 ft Rated Head, Automatic/Non Automatic: Automatic, 1-1/2 in, 2 in FNPT Outlet, 6/10 hp, 115 VAC, 12 A Full Load/38.9 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 25 ft Cord, Cast Iron Multi-Vane Semi-Open Impeller, 104 deg F Continuous/140 deg F Intermittent, NEMA 1/4X Enclosure, Ball/Race Bearing, Cast Iron, 11.2 in W x 7 in D x 16.4 in H Dimensions, Domestic
QTY
  • Semi-open impeller permits passage of solids without clogging
  • Heavy cast iron construction
  • 416 stainless steel rotor shaft
  • Oil filled hermetically sealed motor
  • Permanently lubricated upper and lower ball bearings
  • Unitized carbon and ceramic shaft seal
  • Automatic, series plug
  • 25 ft quick connect power cord
  • 3/4 in solid handling
  • Stainless steel fasteners
  • 2 in FNPT with a 1-1/2 in FNPT cast iron flange provided
  • The exterior of the casting shall be protected with powder coat paint
Semi-open impeller permits passage of solids without clogging
Heavy cast iron construction
416 stainless steel rotor shaft
Oil filled hermetically sealed motor
Permanently lubricated upper and lower ball bearings
Unitized carbon and ceramic shaft seal
Automatic, series plug
25 ft quick connect power cord
3/4 in solid handling
Stainless steel fasteners
2 in FNPT with a 1-1/2 in FNPT cast iron flange provided
The exterior of the casting shall be protected with powder coat paint