Grundfos 98125827 CM Series Compact Multi-Stage Centrifugal Pump, 1 in NPT Inlet x 1 in NPT Outlet, 2 hp Power Rating, 115 to 230 VAC, 1 ph, 304 Stainless Steel, 3360 rpm Motor
98125827
MFG #: 98125827
$3,619.19
/ EA
Non-Stock Item
- Amperage Rating: 18.8/9.8 A
- Dimensions: 19.8 in L x 7.01 in W x 9.02 in H
- Enclosure Type: IP55 TEFC
- Flow Rate: 16.3 gpm
- Frequency Rating: 60 Hz
- Impeller Type: (8) 304 Stainless Steel
- Inlet Size: 1 in NPT
- Manufacturer Name: Grundfos
- Material: 304 Stainless Steel
- Maximum Pressure: 232 psi
- Motor Speed: 3360 rpm
- Mounting Type: Horizontal
- Outlet Size: 1 in NPT
- Phase: 1
- Power Rating: 2 hp
- Series: CM Series
- Service Factor: 1
- Temperature Rating: 131 deg F Ambient
- Type: Compact Multi-Stage
- Voltage Rating: 115 to 230 VAC
The Grundfos CM pump has been created with compactness, flexibility and reliability as its central features. This horizontal multi-stage close-coupled pump is a compact, reliable and quiet pump designed to work in a variety of applications. CM pumps are fitted with mains-operated motors. A Grundfos engineered mechanical shaft seal has been designed to eliminate industry-wide problems with shaft seals sticking where SIC-SIC seal faces are used. The solution builds on both the implementation of a rotation stop on the stationary ring and different surface finishing on both the stationary and rotating rings.
- Includes
- Item Features
- Standards
84Z03093 1 ph 90CC Motor
- Modular construction
- Customized solutions
- High reliability
- Service-friendly
- Wide performance range
- Low noise level
- Electro-coated cast-iron parts
- Superior dry running capabilities
- Reduced footprint
- Low maintenance costs
- Single pump model for multiple applications
- Reduced downtime
- End suction close coupled multi-stage pump designs
- Basic pump version
- EPDM rubber parts
- Standard motor (IP55)
- Prepared mains plug for cable glands
- Without sensor
- O-ring shaft seal with fixed driver, silicon carbide rotating seal face, silicon carbide stationary seal face and EPDM secondary seal
AISI 304/EN 1.4301 Sleeve/Pump Shaft/Impellers/Chambers|ACS|CE Certified|cULus Listed|cURus Recognized|CC122B|IE3|ECUR|EAC Marked|TR Certified|WRAS Certified