Grundfos

Grundfos 99080196 CM Series Compact Multi-Stage Centrifugal Pump, 1 in NPT Inlet x 1 in NPT Outlet, 1-1/2 hp Power Rating, 208 to 230/440 to 480 VAC, 3 ph, 304 Stainless Steel, 3430 to 3470 rpm Motor

99080196 MFG #: 99080196
$2,041.79 / EA
Non-Stock Item
Grundfos 99080196 CM Series Compact Multi-Stage Centrifugal Pump, 1 in NPT Inlet x 1 in NPT Outlet, 1-1/2 hp Power Rating, 208 to 230/440 to 480 VAC, 3 ph, 304 Stainless Steel, 3430 to 3470 rpm Motor
  • Amperage Rating: 5.2 to 5.1/2.55 to 2.65 A
  • Dimensions: 17.83 in L x 6.22 in W x 7.52 in H
  • Enclosure Type: IP55 TEFC
  • Flow Rate: 8.85 gpm
  • Frequency Rating: 60 Hz
  • Impeller Type: (8) 304 Stainless Steel
  • Inlet Size: 1 in NPT
  • Manufacturer Name: Grundfos
  • Material: 304 Stainless Steel
  • Maximum Pressure: 232 psi
  • Maximum Suction Lift: 6.02 ft
  • Motor Speed: 3430 to 3470 rpm
  • Mounting Type: Horizontal
  • Outlet Size: 1 in NPT
  • Phase: 3
  • Power Rating: 1-1/2 hp
  • Series: CM Series
  • Service Factor: 1
  • Temperature Rating: 131 deg F Ambient
  • Type: Compact Multi-Stage
  • Voltage Rating: 208 to 230/440 to 480 VAC
The Grundfos CM pump has been created with compactness, flexibility and reliability as its central features. This horizontal multi-stage close-coupled pump is a compact, reliable and quiet pump designed to work in a variety of applications. CM pumps are fitted with mains-operated motors. A Grundfos engineered mechanical shaft seal has been designed to eliminate industry-wide problems with shaft seals sticking where SIC-SIC seal faces are used. The solution builds on both the implementation of a rotation stop on the stationary ring and different surface finishing on both the stationary and rotating rings.
QTY
Add to List
  • Item Features
  • Includes
  • Standards
  • Modular construction
  • Customized solutions
  • High reliability
  • Service-friendly
  • Wide performance range
  • Low noise level
  • Electro-coated cast-iron parts
  • Superior dry running capabilities
  • Reduced footprint
  • Low maintenance costs
  • Single pump model for multiple applications
  • Reduced downtime
  • End suction close coupled multi-stage pump designs
  • Basic pump version
  • EPDM rubber parts
  • Standard motor (IP55)
  • Prepared mains plug for cable glands
  • Without sensor
  • O-ring shaft seal with fixed driver, silicon carbide rotating seal face, silicon carbide stationary seal face and EPDM secondary seal
85904389 3 ph 80CB Motor
AISI 304/EN 1.4301 Sleeve/Pump Shaft/Impellers/Chambers|ACS|CE Certified|cURus Recognized|EAC Marked|TR Certified|WRAS Certified