Lithonia Lighting® L7X R6 Airtight Contractor Select Downlight Housing, E26 Incandescent Lamp, IC/Non-IC Insulation, 120 VAC, 7 in Ceiling Opening, Steel Housing
122H7E
MFG #: L7X R6
$8.99
/ EA
Non-Stock Item
- Request For Quote: No
Lithonia Lighting® Downlight Housing, Airtight Contractor Select, Series: L7X, 120 VAC, 7 in Ceiling Opening, E26 Incandescent Lamp, 1 Lamp, IC/Non-IC Insulation, Ceiling Mounting, For Use With: 7O2 PF/7O2A Open Narrow Flange/7B2 TOR/7B2 TRMW TOR Baffle Narrow Flange/7RE1 Regressed Eyeball Wide Flange, 6-7/8 in Diameter, 8-3/4 in Height, 23 in Width, Steel Housing Material
- Recessed housing rated IC/non-IC
- For new construction only
- Approved for all ceiling and wiring types
- Approved for direct burial in insulation
- Airtight standard
- Tested to meet current energy codes
- Aluminum housing with galvanized steel pan
- Galvanized bar hangers span up to 24 in OC and feature built-in nailer and integral T-bar clips
- Two locking screws hold fixture in position
- Galvanized steel junction box (4) built-in Romex® clamps
- (5) 1/2 in and (2) 3/4 in nominal knockouts with slots for pryout ceiling recessed mounting
- Rated for through branch wiring
- Maximum 4 (2 in, 2 out) 12 AWG conductors
- Ground wire provided
- Removable J-box door for easy access
- Retaining clips riveted to top of reflector hold trim inside housing
- 2-side mounted torsion springs on the trim and 2 receiving brackets in the can ensure a consistently
- Durable medium base porcelain socket with nickel plated copper alloy screw shell and contact
- Socket clips to top of housing to prevent paint overspray in socket screw shell
- Socket attaches to reflector to ensure proper and consistent lamp position
Recessed housing rated IC/non-IC
For new construction only
Approved for all ceiling and wiring types
Approved for direct burial in insulation
Airtight standard
Tested to meet current energy codes
Aluminum housing with galvanized steel pan
Galvanized bar hangers span up to 24 in OC and feature built-in nailer and integral T-bar clips
Two locking screws hold fixture in position
Galvanized steel junction box (4) built-in Romex® clamps
(5) 1/2 in and (2) 3/4 in nominal knockouts with slots for pryout ceiling recessed mounting
Rated for through branch wiring
Maximum 4 (2 in, 2 out) 12 AWG conductors
Ground wire provided
Removable J-box door for easy access
Retaining clips riveted to top of reflector hold trim inside housing
2-side mounted torsion springs on the trim and 2 receiving brackets in the can ensure a consistently tight fit with the ceiling
Durable medium base porcelain socket with nickel plated copper alloy screw shell and contact
Socket clips to top of housing to prevent paint overspray in socket screw shell
Socket attaches to reflector to ensure proper and consistent lamp position