3M™ 5536A QS-III 5536A Cold Shrink In-Line Splice Kit, 35 kV, 350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil Conductor, 2 ft 11 in L Splice, Silicon Rubber

271501537 MFG #: 5536A
$4,057.67 / EA
Non-Stock Item
3M™ 5536A QS-III 5536A Cold Shrink In-Line Splice Kit, 35 kV, 350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil Conductor, 2 ft 11 in L Splice, Silicon Rubber
  • Manufacturer: 3M
  • Request For Quote: No
  • Type: 4-Way Multi-Mold Resin
  • Series: 85 Series
  • Voltage Rating: 1
  • Cable Type: Non-Shielded
  • Cable Diameter: 7/16
  • Conductor Size: 4 AWG, 8 AWG
  • Splice Length: 5
  • Connector Type: Split Bolt H Tap or C Compression
  • Temperature Rating: 90 to 130
  • Material: Resin
  • Color: Green
  • Brand: 3M™
3M™ Splice Kit, Cold Shrink In-Line, Series: QS-III 5536A, 35 kV, Longitudinally Corrugated/Tape Shield/UniShield®/Wire Shield Cable, 350 kcmil, 500 kcmil, 750 kcmil, 1000 kcmil Conductor, 1.24 to 2.07 in Insulation, 2 ft 11 in Splice Length, 1 Conductor, 105 to 140 deg C, Silicon Rubber, Black, 3.9 in Dia Dimensions
QTY
Add to List
  • In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielde
  • Versatility designed into each kit accommodates a wide range of cable size
  • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interfa
  • All materials provided to insulate and waterproof one splice, compound has low viscosity for fast, c
  • Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct bu
  • Convenient closed mixing pouch permits clean, easy resin handling
  • Wrap around polyester film mold contains porous webbing which assures proper insulation spacing arou
  • Silicon rubber splice body provides good high and low temperature performance and the EPDM rubber ja
  • High voltage, production-tested for partial discharge and AC ensure reliability
  • No special tools required
  • Electrically insulates odd sized and odd shaped splices on cables
  • Cold shrink design for quick and easy installation
  • The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick i
  • Pliable plastic molds are formed around splices
  • Rated for 1 kV cables
  • Used with in-line splicing, feeder and distribution circuits, tape, wire, UniShield® and longitudina
  • 4-1/4 in spacer web, 0.85 sealing putty
  • 0.51 to 1.7 in OD connector
  • Accommodates 4 AWG stranded H or C-tap compression conductors
  • 6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shear bolt conn
  • 1-3/4 in maximum conductor size (height plus width)
  • 1090 psi tensile strength
  • 1-1/2 in maximum sheath opening length
  • 610% elongation
  • 444 psi tensile strength
  • 370 V/mil dielectric strength
  • 98% elongation
  • 524 V/mil dielectric strength
  • 8 AWG, 4 AWG conductor size
  • 10/case
  • 7/16 in OD run/tap cable
In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
Versatility designed into each kit accommodates a wide range of cable size
Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
All materials provided to insulate and waterproof one splice, compound has low viscosity for fast, complete filling of splice and low exotherm which will not damage plastic insulated cable
Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations
Convenient closed mixing pouch permits clean, easy resin handling
Wrap around polyester film mold contains porous webbing which assures proper insulation spacing around splice and connector
Silicon rubber splice body provides good high and low temperature performance and the EPDM rubber jacket offers physical protection
High voltage, production-tested for partial discharge and AC ensure reliability
No special tools required
Electrically insulates odd sized and odd shaped splices on cables
Cold shrink design for quick and easy installation
The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick installation and better cable size transitions and 15,000 a rated for faults current protection
Pliable plastic molds are formed around splices
Rated for 1 kV cables
Used with in-line splicing, feeder and distribution circuits, tape, wire, UniShield® and longitudinally corrugated (LC) shielded cables, transitions from shielded to neutral power cables, copper or aluminum conductors, size transition splicing, direct bur
4-1/4 in spacer web, 0.85 sealing putty
0.51 to 1.7 in OD connector
Accommodates 4 AWG stranded H or C-tap compression conductors
6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shear bolt connector length
1-3/4 in maximum conductor size (height plus width)
1090 psi tensile strength
1-1/2 in maximum sheath opening length
610% elongation
444 psi tensile strength
370 V/mil dielectric strength
98% elongation
524 V/mil dielectric strength
8 AWG, 4 AWG conductor size
10/case
7/16 in OD run/tap cable