Crouse-Hinds

Crouse-Hinds Condulet® TB75M Type TB Conduit Outlet Body, 3/4 in Hub, 5 Form, 9.5 cu-in Capacity, Malleable Iron, Electro-Galvanized/Aluminum Acrylic Painted

436931 MFG #: TB75M
$27.91 / EA
Non-Stock Item
Crouse-Hinds Condulet® TB75M Type TB Conduit Outlet Body, 3/4 in Hub, 5 Form, 9.5 cu-in Capacity, Malleable Iron, Electro-Galvanized/Aluminum Acrylic Painted
  • Capacity: 9.5 cu-in
  • Connection Type: Thread
  • Country of Origin: IN
  • Dimensions: 6 in L x 1-1/2 in W x 2-1/4 in H
  • Enclosure: NEMA 3R
  • Finish: Electro-Galvanized/Aluminum Acrylic Painted
  • Form: 5
  • Hub Size: 3/4 in
  • Manufacturer Name: Eaton
  • Material: Malleable Iron
  • Number of Hubs: 3
  • Type: Type TB
Form 5 malleable iron conduit bodies, covers and gaskets from Eaton's Crouse-Hinds Division are used in conduit systems to act as pull outlets for conductors being installed, provide openings for making splices and taps in conductors, make 90 degree bends in conduit runs, and provide access to conductors for maintenance and future system changes. Form 5 conduit bodies are manufactured in trade sizes 1/2" to 4", and are interchangeable with Appleton Form 35 conduit bodies. They are also available with a hot dip galvanized finish for added corrosion protection against road salt and other harsh environmental factors.
QTY
Add to List
  • Standards
  • Item Features
  • Application
UL 514B|Federal Specification W-C-586D|CSA 22.2 No. 18
  • Smooth and rounded integral bushings for protection of wire insulation
  • Malleable iron construction provides high impact resistance and durability
  • Zinc electroplate and aluminum acrylic paint finish for corrosion resistance and durability
  • Solid neoprene gaskets may be converted to open type by pulling out perforated center section
  • Domed sheet steel covers provide additional cubic capacity
  • Cast malleable covers 1/2 to 2 in flat, 2-1/2 to 4 in domed
  • Stainless steel self-retaining cover screws
  • Provide openings for making splices and taps in conductors
  • Connect conduit sections
  • Provide taps for branch conduit runs
  • Makes 90 deg bends in conduit runs
  • Provide access to conductors for maintenance and future system changes
Used to act as pull outlets for conductors being installed and for rigid/IMC Conduit