Grundfos

Grundfos 99391883 CRNE 6-Stage In-Line Centrifugal E-Pump With Integrated Frequency Converter, 1-1/4 in ANSI Flange Inlet x 1-1/4 in ANSI Flange Outlet, 2 hp Power Rating, 200 to 240 VAC, 3 ph, 316 Stainless Steel, 3452 rpm Motor

99391883 MFG #: 99391883
Requires Quote
Non-Stock Item
Grundfos 99391883 CRNE 6-Stage In-Line Centrifugal E-Pump With Integrated Frequency Converter, 1-1/4 in ANSI Flange Inlet x 1-1/4 in ANSI Flange Outlet, 2 hp Power Rating, 200 to 240 VAC, 3 ph, 316 Stainless Steel, 3452 rpm Motor
  • Amperage Rating: 5.4 to 4.6 A
  • Country of Origin: US
  • Enclosure Type: IP55 TEFC
  • Flow Rate: 30 gpm
  • Frequency Rating: 60 Hz
  • Impeller Type: (6) 316 Stainless Steel
  • Inlet Size: 1-1/4 in ANSI Flange
  • Manufacturer Name: Grundfos
  • Material: 316 Stainless Steel
  • Maximum Head: 203.8 ft
  • Maximum Pressure: 362 psi
  • Motor Speed: 3452 rpm
  • Mounting Type: Vertical (Zero-U)
  • Outlet Size: 1-1/4 in ANSI Flange
  • Phase: 3
  • Power Rating: 2 hp
  • Series: CRNE
  • Service Factor: 1
  • Temperature Rating: -4 to 250 deg F
  • Type: 6-Stage
  • Voltage Rating: 200 to 240 VAC
The CRNE pumps are based on the CRN pumps. CRNE pumps belong to the so-called E-pump family and are referred to as E-pumps. CRNE pumps are fitted with an E-motor, i.e. a motor with built-in variable frequency drive. The E-pump motor is a Grundfos MLE motor. The built-in frequency converter enables continuously variable control of the motor speed. This means that the pump can be set to operate at any duty point. The purpose of continuously variable speed control of the motor speed is to adjust the performance to a given requirement. CRNE pumps are available with a pressure sensor enabling the control of the pressure on the outlet side of the pump. The purpose of supplying the E-pumps with a pressure sensor is to make the installation and commissioning simple and quick. All other E-pumps are supplied without sensor.
QTY
Add to List
  • Item Features
  • Application
  • Includes
  • Standards
  • Warranty
  • Undersize motor pump version with sensor
  • DIN/ANSI/JIS flange pipe connection
  • Basic material version
  • EPDM rubber parts
  • Balanced cartridge shaft seal with O-ring, silicon carbide rotating seal face, silicon carbide stationary seal face and EPDM secondary seal
Water Supply, Industry, Water Treatment and Irrigation
56C Frame 3 ph 90C Motor
EN 1.4408/AISI 316 Base|EN 1.4401/AISI 316 Impeller|cURus Recognized|NSF 61
24 Months from Date of Installation/30 Months from Date of Manufacture