Crouse-Hinds

Crouse-Hinds EBMBB FD W60360 Heavy Duty Non-Fused Disconnect Switch With Switch, Sealing Gasket, Lock Nut, 200 to 600 VAC, 250 VDC, 60 A, 7-1/2 hp, 20 hp, 40 hp, 60 hp

EBMBB FD W60360 MFG #: EBMBB FD W60360
$13,829.15 / EA
Non-Stock Item
Crouse-Hinds EBMBB FD W60360 Heavy Duty Non-Fused Disconnect Switch With Switch, Sealing Gasket, Lock Nut, 200 to 600 VAC, 250 VDC, 60 A, 7-1/2 hp, 20 hp, 40 hp, 60 hp
  • Actuator Type: Handle
  • Amperage Rating: 60 A
  • Country of Origin: DO
  • Dimensions: 14.46 in W x 10.25 in D x 26.9 in H
  • Enclosure Type: NEMA 3/3R/4/4X
  • Finish: Natural
  • Horsepower: 7-1/2 hp, 20 hp, 40 hp, 60 hp
  • Manufacturer Name: Eaton
  • Material: Copper-Free Aluminum
  • Mounting Type: Foot
  • Series: EBM
  • Type: Heavy Duty Non-Fused
  • Voltage Rating: 200 to 600 VAC/250 VDC
Crouse-Hinds series EBM disconnect switches are used to disconnect motor, lighting and other circuits in locations made hazardous by the presence of flammable gases or vapors or ignitable dusts. They also provide disconnect means and short circuit protection (fusible version).
QTY
Add to List
  • Item Features
  • Application
  • Standards
  • Rugged corrosion-resistant cast copper-free aluminum construction
  • Switch operating handle is located through the right side wall of the body, permits visual confirmation of correct alignment and operation
  • Total compliance to the wiring end room requirements of the national electrical code
  • Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
  • Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
  • Stainless steel hinges allow the cover to swing well out of the way
  • Stainless steel quick release captive hex head cover bolts, stainless steel springs provide clear indication that cover bolts are fully retracted from the body
  • Switch operating handle can be padlocked in either the "ON" or "OFF" position
  • Neoprene cover gasket permanently attached to the cover seals out moisture
  • Bodies have top and bottom drilled and tapped conduit entrances for power and conduits removable reducers are supplied as standard, to accommodate smaller size conduits all conduit entrances are plugged
  • Tap-on mounting feet
Industrial Facilities and Factories, Facility, Power Distribution and Control Applications
Class I, Div 2 Hazardous Locations NEC501.10(B)(4)|cULus Listed|UL File No. E23223