EATON

EATON EBMBD FD Dust-Ignitionproof Explosionproof Watertight Disconnect Enclosure, 14.46 in W x 10-1/4 in D x 29.4 in H, NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12 NEMA Rating, Copper-Free Aluminum

EBMBD FD MFG #: EBMBD FD
$12,124.36 / EA
Non-Stock Item
EATON EBMBD FD Dust-Ignitionproof Explosionproof Watertight Disconnect Enclosure, 14.46 in W x 10-1/4 in D x 29.4 in H, NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12 NEMA Rating, Copper-Free Aluminum
  • Country of Origin: US
  • Cover Type: Hinged
  • Depth: 10-1/4 in
  • Electrical Ratings: 100 A, 600 VAC
  • Height: 29.4 in
  • Manufacturer Name: Eaton
  • Material: Copper-Free Aluminum
  • Mounting Type: Foot
  • NEMA Rating: NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12
  • Type: Dust-Ignitionproof Explosionproof Watertight
  • Width: 14.46 in
Crouse-Hinds series EBM disconnect switches are used to disconnect motor, lighting and other circuits in locations made hazardous by the presence of flammable gases or vapors or ignitable dusts. They also provide disconnect means and short circuit protection (fusible version).
QTY
Add to List
  • Application
  • Item Features
For disconnect motor, lighting and other circuits, Indoors or outdoors in damp, wet and dirty locations or in areas where frequent washdowns, heavy rain or water spray is prevalent, for provide disconnect means and short circuit protection applications
  • Rugged corrosion-resistant cast copper-free aluminum construction (less than 0.4 of 1%)
  • Switch operating handle is located through the right side wall of the body, permits visual confirmation of correct alignment and operation
  • Total compliance to the wiring end room requirements of the National electrical Code
  • Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
  • Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
  • Stainless steel hinges allow the cover to swing well out of the way
  • Stainless steel quick release captive hex head cover bolts
  • Stainless steel springs provide clear indication that cover bolts are fully retracted from the body
  • Switch operating handle can be padlocked in either the ON or OFF position
  • Neoprene cover gasket permanently attached to the cover seals out moisture
  • Bodies have top and bottom drilled and tapped conduit entrances for power and conduits
  • Removable reducers are supplied as standard, to accommodate smaller size conduits
  • All conduit entrances are plugged
  • Tap-on mounting feet