Crouse-Hinds

Crouse-Hinds FlexStation™ EDS21273 SA 1-Gang Dead End Factory Sealed Heavy Duty Selector Switch Control Station With Selector Switch, 600 VAC, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating

EDS21273 SA MFG #: EDS21273 SA
$1,362.52 / EA
Non-Stock Item
Crouse-Hinds FlexStation™ EDS21273 SA 1-Gang Dead End Factory Sealed Heavy Duty Selector Switch Control Station With Selector Switch, 600 VAC, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating
  • Contact Mode: Maintained
  • Country of Origin: MX
  • Dimensions: 3-1/2 in W
  • Finish: Natural
  • Manufacturer Name: Eaton
  • Material: Copper-Free Aluminum
  • NEMA Rating: NEMA 3/7B/7C/7D/9E/9F/9G
  • Series: EDS
  • Type: 1-Gang Dead End Factory Sealed Heavy Duty
  • Voltage Rating: 600 VAC
New EDSX series available with NEMA 4X protection for Class I, Division 2 hazardous areas.Crouse-Hinds series EDSX, EDS and EFS hazardous area pushbutton, pilot light and selector switch control stations are used in conjunction with magnetic starters or contactors for remote control of motors.eliminates the need for external seals, simplifying installation and reducing costs.Pilot lights are used to visually indicate that the desired function is being performed.EDSX, EDS and EFS control stations are factory sealed to prevent arcing of the enclosed device from causing ignition of a hazardous atmosphere external to the enclosure.Factory sealing Typical applications for EDSX, EDS and EFS control stations include industrial areas where the atmospheres may contain hazardous gases and/or dusts. A wide range of models are available to maximize application flexibility.
QTY
Add to List
  • Item Features
  • Standards
  • Application
  • Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
  • Reduce installation problems
  • Eliminate external seals
  • Lower installation costs
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance of water around operating shafts
  • Mounting lugs and taper tapped hubs with integral bushing
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and all selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
  • Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
  • On enclosure with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
  • Explosionproof, dust-ignitionproof, rain tight
  • 3/4 in hub
  • Two-circuit
  • Three-position
  • ED11 replacement contact blocks
ATEX ITS07/15652U|CENELEC Approved|CSA C22.2 File No. 30, Class I Division 1, 2 Groups B/C/D, Class II, Division 2, Groups E/F/G, Class III, CENELEC|UL File No. 1203
Industrial Facilities and Factories, Facility, Power Distribution and Control Applications