Crouse-Hinds
Crouse-Hinds FlexStation™ EDS2130 SA 1-Gang Dead End Factory Sealed Snap Switch Control Station With Switch, 120/277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating
EDS2130 SA
MFG #: EDS2130 SA
$1,133.53
/ EA
Non-Stock Item
- Actuator: Handle
- Amperage Rating: 20 A
- Connection Type: Thread
- Country of Origin: MX
- Dimensions: 3-1/2 in W x 3-1/16 in D
- Finish: Natural
- Manufacturer Name: Eaton
- Material: Copper-Free Aluminum
- Mounting Type: Surface
- NEMA Rating: NEMA 3/7B/7C/7D/9E/9F/9G
- Number of Poles: 3
- Operator Type: Front
- Series: EDS
- Type: 1-Gang Dead End Factory Sealed
- Voltage Rating: 120/277 VAC
Crouse-Hinds series factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure. Enclosures are used in conjunction with magnetic starters or contactors for remote control of motors.
- Standards
- Application
- Item Features
ATEX ITS07/15652U|CENELEC Approved|CENELEC|Class I Division 1, 2 Groups B/C/D|Class II, Division 2, Groups E/F/G|Class III|CSA C22.2 File No. 30|UL File No. 1203
Industrial Facilities and Factories, Facility, Power Distribution and Control Applications
- Reduce installation problems
- Eliminate external seals
- Lower installation costs
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and all selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosure with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Dust-ignitionproof construction, rain tight
- To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
- In conjunction with magnetic starters or contactors for remote control of motor
- For manual starting of small AC/DC motors
- To provide manual starting and stopping and motor running protection (with heater)
- 3/4 in hub
- Three-way