Crouse-Hinds

Crouse-Hinds FlexStation™ EDS215 SA 2-Circuit 1-Gang Factory Sealed Fully Assembled Heavy Duty Pushbutton Switch Control Station With Pushbutton, 600 VAC, 2NO-2NC Contact, 2 Operators, NEMA/EEMAC 3/7B/7C/7D/9E/9F/9G NEMA Rating

EDS215 SA MFG #: EDS215 SA
$1,498.85 / EA
Non-Stock Item
Crouse-Hinds FlexStation™ EDS215 SA 2-Circuit 1-Gang Factory Sealed Fully Assembled Heavy Duty Pushbutton Switch Control Station With Pushbutton, 600 VAC, 2NO-2NC Contact, 2 Operators, NEMA/EEMAC 3/7B/7C/7D/9E/9F/9G NEMA Rating
  • Connection Type: Dead End
  • Contact Configuration: 2NO-2NC
  • Contact Mode: Momentary
  • Country of Origin: MX
  • Dimensions: 3-1/16 in L x 3-1/2 in W x 2-11/16 in D
  • Finish: Natural
  • Legend: START-STOP
  • Manufacturer Name: Eaton
  • Material: Copper-Free Aluminum
  • Mounting Type: Surface
  • NEMA Rating: NEMA/EEMAC 3/7B/7C/7D/9E/9F/9G
  • Number of Operators: 2
  • Operator Type: Front Operated Button
  • Series: EDS
  • Type: 2-Circuit 1-Gang Factory Sealed Fully Assembled Heavy Duty
  • Voltage Rating: 600 VAC
Crouse-Hinds series factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure. Enclosures are used in conjunction with magnetic starters or contactors for remote control of motors. Manual motor starters are used to provide motor running protection (with heater) and manual starting and stopping of small AC/DC motors.
QTY
Add to List
  • Item Features
  • Application
  • Standards
  • Reduce installation problems
  • Eliminate external seals
  • Lower installation costs
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons, prevents accumulation of dirt and entrance of water around operating shafts
  • Mounting lugs and taper tapped hubs with integral bushing
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and all selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
  • Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
  • On enclosure with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
  • When stop is indicated, button is automatically red, when START is indicated, button is automatically green, otherwise, black buttons are standard
Industrial Facilities and Factories, Facility, Power Distribution and Control, Chemical Plants, Oil and Gas Refineries, Paint and Varnish Manufacturing Plants, Gasoline Bulk Loading Terminals, Grain Elevators, Grain Processing Industries, Coal Processing or Handling Areas or Metal Handling or Finishing Areas Where Atmosphere May Contain Hazardous Gases and/or Dust and Non-Hazardous Areas Locations, Manual Starting of Small AC or DC Motors and Wet Locations
CSA C22.2 File No. 30|Class II Division 1 Groups E/F/G|Class II Division 2 Groups F/G|Class III|NEC/CEC Certified|Class I Division 1, 2 Groups B/C/D|UL File No. 1203