Kidde® PI9010CA-N Battery Operated Alarm, Ionization/Photoelectric Sensor, Power Source: 9 V Battery, LED Display, 85 dB at 10 ft
PI9010CA-N
MFG #: PI9010CA-N
$43.33
/ EA
Non-Stock Item
- Alarm Type: Smoke
- Audible Alert: 85 dB at 10 ft
- Dimensions: 4.3 cm D x 14.7 cm Dia
- Display Type: LED
- Humidity Rating: 10 to 95 %
- Manufacturer Name: Kidde
- Number of Sensors: 2
- Operating Temperature: 40 to 100 deg F
- Power Source: 9 V Battery
- Sensitivity Level: 0.72 to 4.0%/ft
- Sensor Type: Ionization/Photoelectric
- Type: Battery Operated
Kidde®, PI9010CA-N, Alarm, Battery Operated, 9 V Battery Power Source, Ionization/Photoelectric Sensor, Alarm: Smoke, 85 dB at 10 ft Alert, 10 to 95 % Humidity, 0.72 to 4.0%/ft Sensitivity, LED Display, 2 Sensors, 40 to 100 deg F Operating, 4.3 cm D x 14.7 cm Dia Dimensions
- Item Features
- Standards
- Ionization Sensor may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms.
- Photoelectric Sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
- 9V Battery Operated No wiring required Provides continuous protection even during power outages
- language preference (English/French) at any time by
- Test Button Simultaneously tests the units electronics and verifies alarm operation
- Tamper Resistant Deters from tampering or theft
- Standby Condition The red LED will flash every 45 seconds to indicate that the smoke alarm is operating properly
- Alarm Condition When the alarm senses products of combustion and goes into alarm, the red LED will flash one flash per second The flashing LED and temporal alarm will continue until the air is cleared
- Hush® Mode The red LED will flash every 10 seconds indicating the smoke alarm is in the Hush® mode
- Low Battery Condition The red LED flash will be accompanied by an audible chirp Replace the battery when this condition occurs
CAN/ULC S531|cUL Listed