Emergi-Lite® Premier™ PREWIN3R Universal Face Exit Sign, LED Lamp, <3.5 W Fixture, 120/347 VAC, Factory White Housing, EXIT Legend

Supply and install the Emergi-Lite® Premier™ series exit Sign. The standard equipment shall operate with a dual-voltage input of 120/347 VAC with less than 2 W of consumption and a universal two-wire DC input voltage from 6 VDC to 48 VDC at less than 2.5 W for single and double face signs. The exit shall be suitable for wall, end or ceiling mount. The faceplate shall be constructed of durable high impact thermoplastic. No screws are necessary to hold the faceplate or the back plate to the housing. The faceplates shall come standard with snap in/out chevrons. The frame shall consist of one-piece factory white thermoplastic. The light source shall be light emitting diodes (LEDs). The LEDs shall provide illumination in normal and emergency operation and shall be mounted inside the exit housing. Red LED technology shall be ALINGAP. An LED sensitive diffuser shall be mounted in front of the LEDs to provide the 6 in H by 3/4 in stroke letters with even illumination. The exit sign shall be C860 approved. The exit sign in a self-powered configuration shall be equipped with a sealed, maintenance-free nickel cadmium battery. The equipment shall recharge the battery in 24 hr and stay illuminated at least 90 min upon AC failure. The self-powered model equipped with advanced diagnostic shall self test by simulating a power failure for one minute every 30 days, 30 min every 60 days and 90 min every 360 days. A diagnostic circuit shall continuously monitor the performance of the battery, charger module and LED lamps. Upon failure detection the system shall display the error on the AC pilot lamp, which will change color from green to red and will flash with a specific code. The red light shall be steady-on in case of in Battery Disconnect in; it shall flash with one blink for in Battery failure in, two blinks for in Charger failure in and four blinks for in LED lamp failure. A label with the diagnostic legend shall be visible next to the pilot light.