Sharkbite® SB0241 2XL Large Diameter Pipe Elbow, 1-1/2 in Nominal, Push-Fit End Style, Brass, Import
SB0241
MFG #: SB0241
Requires Quote
- Request For Quote: Yes
Sharkbite® Pipe Elbow, Large Diameter, Series: 2XL, Fitting/Connector Type: 90 deg Elbow, 1-1/2 in Nominal, Push-Fit, 200 psi, 20 to 200 deg F, Brass, Import
- Quick connect - No tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to re
- Quick disconnect - Disconnect in seconds by sliding the de-mount tool down the pipe to engage the de
- SAFE-recessed release collar - Commercial SharkBite® require a special demount tool and cannot be ac
- Extensive range including slip feature on couplings and tee's - When repairing or tapping into exist
- Easy installation unlike the tool intensive connection methods there is no need to send multiple fit
- All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the
- Wet or dry - No waiting for copper tube to dry before soldering or glue to cure, SharkBite® makes an
- No tools - Unlike alterative tool intensive connections systems, SharkBite® has no special tooling r
- No time - Fastest connection - cut-push-done, easy access to small or confined places, no flame - do
- No waste - Should you make an error or simply want to change your installation, no problem for Shark
- Fittings cannot be disassembled - SharkBite® commercial fitting are factory assembled and components
- Long pipe engagement - Provides pipe support against lateral pipe forces
- Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953
- Suitable for underground installation subject to local code authorities/inspector
- Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for
- Design for use on ASTM B88 hard drawn and annealed copper type K, l or M, ASTM F876 and F877 pex and
- Chloramine resistant EDPM O-ring
- Copper tube liner
- 316 stainless steel grab ring
- Acetyl copolymer SharkBite® cartridge assembly
Quick connect - No tools, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every time
Quick disconnect - Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs and rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe
SAFE-recessed release collar - Commercial SharkBite® require a special demount tool and cannot be accidentally disconnected/released
Extensive range including slip feature on couplings and tee's - When repairing or tapping into existing pipe with push-fittings you must be able to either move the fitting or the pipe to ensures the pipe is engaged fully into the fitting, with rigid pipe
Easy installation unlike the tool intensive connection methods there is no need to send multiple fitters to a job, SharkBite® commercial has been designed to be installed or removed by one person
All fittings are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further
Wet or dry - No waiting for copper tube to dry before soldering or glue to cure, SharkBite® makes an instant connection in seconds
No tools - Unlike alterative tool intensive connections systems, SharkBite® has no special tooling required for installation
No time - Fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal
No waste - Should you make an error or simply want to change your installation, no problem for SharkBite®, simply remove and re-use, (fitting used for repeated testing must not be used in any permanent application)
Fittings cannot be disassembled - SharkBite® commercial fitting are factory assembled and components cannot be removed
Long pipe engagement - Provides pipe support against lateral pipe forces
Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372
Suitable for underground installation subject to local code authorities/inspector
Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation
Design for use on ASTM B88 hard drawn and annealed copper type K, l or M, ASTM F876 and F877 pex and ASTM D2846/D2846M CPVC water pipe
Chloramine resistant EDPM O-ring
Copper tube liner
316 stainless steel grab ring
Acetyl copolymer SharkBite® cartridge assembly