Sharkbite® SB0754 2XL Large Diameter 45 deg Street Elbow, 2 in Nominal, Push-Fit End Style, Brass, Import
SB0754
MFG #: SB0754
Requires Quote
Sharkbite® Street Elbow, Lead Free Large Diameter, Series: 2XL, Fitting/Connector Type: 45 deg Elbow, 2 in Nominal, Push-Fit, 200 psi, Brass, 20 to 200 deg F, Import
- Quick connect: No tool, soldering, clamps, unions or glue required, cut pipe square, de-burr to remo
- Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the dem
- SAFE-recessed release collar: Commercial SharkBite require a special demount tool and cannot be acci
- Extensive range including slip feature on couplings and tee's: When repairing or tapping into existi
- Easy installation: Unlike the tool intensive connection methods there is no need to send multiple fi
- All fitting are lubricated for easy connection and by fitting the de-mount tool before engaging the
- Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an i
- No tools: unlike alterative tool intensive connections systems, SharkBite® has no special tooling re
- No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - doe
- No waste: should you make an error or simply want to change your installation, no problem for SharkB
- Fittings cannot be disassembled: SharkBite® commercial fitting are factory assembled and components
- Long pipe engagement: provides pipe support against lateral pipe forces
- Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953
- Suitable for underground installation subject to local code authorities/inspector
- Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for
- Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 PEX and
- Chloramine resistant EDPM o-ring, copper tube liner, 316 stainless steel grab ring, acetyl copolymer
- For use with copper, CPVC and PEX pipe
Quick connect: No tool, soldering, clamps, unions or glue required, cut pipe square, de-burr to remove rough edges/debris, mark the pipe for correct depth and push-to get a pressure ready connection every time
Quick disconnect: Disconnect in seconds by sliding the de-mount tool down the pipe to engage the demount lugs and rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe
SAFE-recessed release collar: Commercial SharkBite require a special demount tool and cannot be accidentally disconnected/released
Extensive range including slip feature on couplings and tee's: When repairing or tapping into existing pipe with push-fittings you must be able to either move the fitting or the pipe to ensures the pipe is engaged fully into the fitting, with rigid pipe l
Easy installation: Unlike the tool intensive connection methods there is no need to send multiple fitters to a job, SharkBite commercial has been designed to be installed or removed by one person
All fitting are lubricated for easy connection and by fitting the de-mount tool before engaging the pipe the force required can be reduced further
Wet or dry: no waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection in seconds
No tools: unlike alterative tool intensive connections systems, SharkBite® has no special tooling required for installation
No time: fastest connection - cut-push-done, easy access to small or confined places, no flame - does not require fire permit or fire marshal
No waste: should you make an error or simply want to change your installation, no problem for SharkBite®, simply remove and re-use, (fitting used for repeated testing must not be used in any permanent application)
Fittings cannot be disassembled: SharkBite® commercial fitting are factory assembled and components cannot be removed
Long pipe engagement: provides pipe support against lateral pipe forces
Lead free (LF) dezincification resistance (DZR) brass: exceeds current no lead legislation - AB1953 or NSF372, dezincification properties (DZR) exceed ISO6509 and NSF-14
Suitable for underground installation subject to local code authorities/inspector
Environmentally friendly: remove and re-use fittings no need to be scrapped, no heat is required for installation
Design for use on ASTM B88 hard drawn and annealed copper type K, l, or M, ASTM F876 & F877 PEX and ASTM D2846/D2846M CPVC water pipe
Chloramine resistant EDPM o-ring, copper tube liner, 316 stainless steel grab ring, acetyl copolymer SharkBite cartridge assembly
For use with copper, CPVC and PEX pipe